This section covers troubleshooting information for physical damage to the Wii console. Please read any troubleshooting information on this page very carefully, to avoid damaging the system any further.
Any time liquid is spilled inside a system, unplug it immediately. What to do will depend on what kind of liquid was spilled:
Object inserted into the Disc Slot
If an object is inserted into the Disc Slot, it will automatically be pulled in, and it won't be possible to eject it. Do not attempt to open the Wii console or otherwise try to remove the object, as it may result in further damage to the console.
The Wii console will need to be repaired. Because this type of damage is not covered under Nintendo's warranty, there will be a charge for the repair. Please click here to set up a repair.
"Residue" left by vinyl sticker
Some vinyl stickers that can be applied to the outer housing of the Wii console may leave behind a sticky residue when removed. We have found that the following procedure can be used to remove the residue:
If you are unable to remove the residue, and it is interfering with your enjoyment of the Wii console, then the system will need to be repaired. Because this type of damage is not covered under Nintendo's warranty, there will be a charge for the repair. Please click here to set up a repair.
Our experience shows that this problem is caused by contamination of foreign material inside the buttons, and the system will need to be repaired. Please click here to set up a repair.
SD slot cover won't stay closed
Our experience shows that this particular problem is caused by physical damage to the either the SD slot cover or the Wii console's plastic housing, and the system will need to be repaired. Because this type of damage is not covered under Nintendo's warranty, there will be a charge for the repair. Please click here to set up a repair.
Game Disc is scratched or cracked
Exposed to extreme heat or cold
If the system has been exposed to extreme heat or cold, allow the Wii console several hours at room temperature to return to warm up or cool down.
If after allowing the system enough time to reach room temperature, and you are still experiencing problems, please use our troubleshooting information to find the problem that the Wii console is having (such as a blank screen).
All other physical damage issues
Please click here to set up a repair. If the damage is not obvious, please be sure to include a description of the issue in the comments section of the repair set up.