Super NES AV to TV Hookup

Note: pictured above is the redesigned Super NES. The
original Super NES uses the same hookup steps listed below.
- Locate the Audio/Video inputs on the back of the TV.
- Place the yellow end of the Stereo AV cable into
the Video "in" on the back of the TV. Connect the red end of the cable
to Audio "in" Right. Connect the white end of the cable to the Audio
"in" Left. Use a slight twisting motion when inserting each cable and ensure
the cables are firmly pressed into the input.
Note: If you have a mono television with only
one Audio input, click here for a
diagram of how the
hook-up will look. The Y-adapter pictured is optional; you can also simply
leave the white cable disconnected instead.
- Connect the rectangular (gray) plug of the Stereo AV
cable into the "multi out" connector on the back of the Control Deck.
- Insert the Game Pak firmly into the Control Deck.
- Plug the Controller(s) into the front of the system. Use
the far left port for player one.
- Plug the AC Adapter into the back of the system . Plug
the other end into a wall outlet.
- Slide the Power Switch on (toward Game Pak).
- Turn on the TV and locate the
input select. It is often
called: input select, AUX (auxiliary), Line, Line In, Input, Source, Select,
In, or EXT (external). Switch the input select to show the Nintendo game.
- The game image should now be displayed on the screen. You
are ready to play!
If after following these directions you are not able to view
the game, try our Troubleshooting Tips.