Alarm Didn’t Sound at the Set Time on Nintendo Sound Clock: Alarmo
Steps for when the alarm doesn’t go off at the set time on Nintendo Sound Clock: Alarmo.
Before you start:
You will need:
Your Nintendo Sound Clock: Alarmo device
You may need to move the clock or items within the sensor zone while troubleshooting.
What to do:
Check that the alarm is turned on.
Press the dial (Confirm Button) to open the menu.
Turn the dial to the Alarm On/Off screen.
Press the Confirm Button.
Follow the instructions to set the alarm to On for the day(s) intended.
Press the Back Button to return to the menu.
Check the bottom of the main clock screen for an indicator that an alarm is set.
Check the sensor zone for moving objects.
Open the menu by pressing the Confirm Button once.
Turn the dial to find the Help screen.
Press the Confirm Button.
Turn the dial to find the Sensor Zone Check screen.
Press the Confirm Button to start the check.
If the check finishes successfully, no moving objects were found in the sensor zone.
If the check does not finish successfully, a moving object was found in the sensor zone and is likely what’s preventing the alarm from functioning properly. Remove the moving object and run the check again.
Test your alarm to confirm it’s functioning as expected.
We recommend that you set a new alarm in the near future to test that the alarm is functioning properly and then set it back to your preferred time after the test.
Additional information
Only one alarm can be set at a time. For example, if you had an alarm set for 9:00 and then set a new alarm for 10:00, the alarm will only go off at 10:00.
Situation Not Resolved:
If you’re unable to get the alarm to go off, your clock may need to be inspected.
Please click here to contact Nintendo Support.