Applies to most 2Wire routers including: 2wire 4011G
By default, the network name (SSID) will appear as: See 'Important Notes' section below
How to access this router's settings:
- Access login by clicking: http://home or http://192.168.1.254
- Enter default* username: (leave blank)
- Enter default* password: Wi-Fi Key (Default WEP) on sticker label
* If you have changed the router's default login settings you will need to enter the newer username and/or password. If you are unable to log in to the router, please call 1-800-255-3700.
Where to find and change your router's:
- WEP/WPA key: On the 'Home Network' page, 'Wireless Settings' example
- Network name: On the 'Home Network' page, 'Wireless Settings' example
- Authentication: On the 'Home Network' page, 'Wireless Settings' example
- Default WEP key: On sticker by barcode (see Important Notes)
Important Notes:
SSID Information
2Wire SSIDs will typically be '2WireXXX.' Where the 'XXX' represents last three digits of the router's serial number.
DS
For error 52000, the Nintendo DS will require a manual connection. For help setting up a DS/DSi manual connection, click here.
Wii
For errors 51330 and 51300, the router will need to switch from "Use default encryption key" to "Use custom encryption key" using the same 10 digit Wi-Fi key.
Default WEP key
2Wire router's have a default WEP key listed on a sticker on the router, typically by the barcode. See the image below for an example: