Key Features:

• The Wii U Pro Controller is an enhanced version of the Classic Controller Pro that has been designed specially to work with the Wii U console.
• The controller is wireless and connects to the Wii U console via Bluetooth, similar to how Wii remotes connect to Wii and Wii U systems.
• Up to four Wii U Pro Controllers can be used at one time.
• Wii U Pro Controllers cannot be used with the Wii. They are designed to be used on the Wii U.

Answer:

No. The Wii U Pro Controller cannot be used in place of the Classic Controller for those games that require the use of the Classic Controller.

Situation:

• Liquid was spilled on the Wii U Accessory.

What to do:

Any time liquid is spilled in an accessory, unplug it immediately if it is plugged into another device. As with any electrical appliance, there is a risk of electrical shock if it is used while wet. The next step will depend upon what was spilled.

• Water

• Remove the battery.

• Wii U Pro Controller (How To)

• If liquid touched the battery, the Wii U Pro Controller will need to be replaced.

• Wii Remote (How To)

• If liquid touched the batteries, the Wii Remote will need to be replaced.

• Let the accessory dry for a few days.

• Do not use any type of heat (e.g. blow-dryer) to speed up the process, as this may cause damage.

• If the accessory isn't working after it has dried, it will need to be replaced.

• Other Liquids

• If the liquid did not enter the accessory, clean the housing. (How To)
• If the liquid did enter the accessory, it will need to be replaced.

Still Not Resolved:

• If your situation is still not resolved, please call 1-800-255-3700 so that we may assist you further.

Answer:

• The Wii U Pro Controller will remain charged for 80 hours.
• Actual battery life depends on the features used, such as the rumble feature or wireless communication use, ambient temperature, and other factors.

Still Not Resolved:

• If you are having issues with battery life, please call 1-800-255-3700 so that we may assist you further.

Answer:

• It takes approximately 4.5 hours to charge the Wii U Pro Controller.
• Charging time will vary depending on how the system is being used and how much charge is left in the battery.

Description:

• Step by step instructions on charging the Wii U Pro Controller.

Important Note!

• The optimal charging temperature is between 50 degrees and 95 degrees Fahrenheit (10 degrees to 35 degrees Celsius).

• It can take up to 4.5 hours to charge the Wii U Pro Controller. This time will vary if the Wii U Pro Controller is being used.

• Once fully charged, the battery will remain charged for 80 hours depending on use.

What to do:

1. Ensure that the Wii U console is turned on.
• The Wii U Pro Controller will not charge if the Wii U console is turned off.
2. Make sure that the USB connector plug is facing in the correct direction before inserting it into the charging cradle.

3. Connect the Wii U Pro Controller USB cable to both the controller and the Wii U console.
4. Make sure all plugs are inserted straight and all the way into the connectors.



• The battery LED will light orange when the battery is charging.

Description:

• Step by step instructions on replacing the battery in a Wii U Pro Controller.

Important Note!

• Turn the Wii U console power off and disconnect the USB cable if it connected to the controller.
• Use a crosshead style, size #00 screwdriver to avoid damage to the screw or threads.

What to do:

1. Loosen the screw and remove the battery cover.

• The battery cover is designed so the screw can be loosened, but not fully removed.



2. Remove the battery by inserting the stylus from the Wii U GamePad under the battery and gently lifting the edge.



3. After 10 seconds, insert the new battery from the right.



4. Replace the battery cover and tighten the screw, being careful not to over tighten it.

Description:

• Step by step instructions on resetting the Wii U Pro Controller L and R control sticks to a neutral position.

What to do:

The neutral position of the control sticks can be incorrectly set if you move them during the following actions:

• Turning the console on
• Launching software
• Quitting software and returning to the Wii U Menu



1. Allow the control sticks to return to a neutral untouched position.
2. Simultaneously hold down the A Button, B Button, + Button, and – Button for at least 3 seconds.

Description:

• Step by step instructions on pairing a Wii U Pro Controller with the Wii U Console.

Important Note!

• Up to six Wii Remotes and/or four Wii Pro Controllers can work together with the Wii U using either the sensor strip on the Wii U GamePad or the sensor bar.

What to do:

1. While on the Wii U Menu, press the SYNC Button on the Wii U Console to display the controller pairing screen.

• You can also pair controllers from the HOME Menu.



2. Press the SYNC button on the console again until the screen shows the controller type you want to pair.



3. Press the SYNC button on the Wii U Pro Controller.
4. Follow the on-screen instructions.
5. The Player LED on the controller will light up when the pairing is complete.

• The Player LED indicates the player number of the controller currently in use.

Description:

• Detailed instructions on how to sync the Wii U Pro Controller.

Important Note!

• You can pair up to 10 controllers with the console. If you pair additional controllers, the oldest controller pairing data is deleted and replaced by the newest data.

What to do:

1. From the Wii U Menu, press SYNC on the front of the Wii U console.
2. Press SYNC on the back of the Wii U Pro Controller.

• The Player LED on the controller will light up when pairing is complete. The Player LED indicates the player number of the controller currently in use.

Description:

• Step by step instructions on checking the battery level of a wii accessory, such as a Wii Remote or a Wii U Pro Controller.

What to do:

1. Press the HOME Button on the Wii U GamePad, Wii Remote, or Wii U Pro Controller.
2. The battery life of each accessory will be displayed at the top of the screen.