S-Video Hookups

Note: The S-Video cables are not compatible with the redesigned Super Nintendo.

    Installation Steps:
  1. Locate the Audio/Video inputs on the back of the TV or VCR.
  2. Place the black end of the S-Video Cable into the S-Video IN on the back of the TV or VCR. Connect the red end of the cable to Audio IN Right.Connect the white end of the cable to the Audio IN Left. Use a slight twistingmotion when inserting the each cable and ensure the cables are firmly pressed into the input.
  3. Connect the rectangular (gray) plug of the S-Video cable into the multi-out connector on the back of the Control Deck.

After system is connected to the TV or VCR:
  1. Insert Game Pak fully into the Control Deck.
  2. Plug the controller(s) into the front of the Control Deck using the left-most port for one-player games.
  3. Plug the AC Adapter into the back of the Control Deck. Plug the other end into a wall outlet.
  4. Set the VCR's TV/VCR button to VCR. You can put a movie in the VCR, press Play, make sure the movie appears on your TV, then press Stop. This puts your VCR into VCR mode.
  5. Slide the Power Switch on (toward the Game Pak).
  6. Turn on the VCR and locate the input select. It's often called: input select, AUX auxiliary), Line, Line In, Input, Source, Select, In, or EXT (external). Switch the input select to show the Nintendo game.
  7. The game image should now be displayed on the screen. You're ready to play! To record video games, set the system up to play games as usual, then insert a video tape and press Record. It's that easy!