Game Boy Advance Hookup Instructions

Important Note:
We highly recommend you review the following precautions before you set up and operate your Nintendo system:

  1. Remove the battery cover and insert two AA batteries. Make sure the positive (+) and negative (-) ends are facing in the correct directions. Insert the negative end first. (When removing batteries, remove the positive end first.)

    Inserting the Batteries

    Important Note: Do NOT use rechargeable nickel cadmium (nicad), nickel metal hydride (nimh), carbon zinc or any other type of non-alkaline batteries. We don't have a list of these batteries, but the battery packaging should indicate what type of battery it is.

  2. Insert a Game Pak into the Game Pak Slot with the label facing away from the Game Boy Advance.

    Inserting the Game

  3. Turn the power ON by sliding the Power Switch to the right. The power LED will be green if you're using fresh batteries. If the batteries are drained (30% power or less), the LED will be red.

    Turning the Power On

    The screen will display the Game Boy logo, and then change to the display for the game that you're playing. If no game is inserted, the Game Boy logo will still be displayed.

  4. To remove the Game Pak after playing, first turn the power OFF by sliding the Power Switch to the left, then slide the Game Pak out of the Game Pak Slot.

    Turn the power offThe light will turn off